Metallurgical Single-girder Overhead Crane

Introduce

Metallurgical Single-girder Overhead Crane is widely used for loading and unloading material in hot environment, such as melting, casting. 

The LDY type metallurgical electric single-girder crane is a space transportation tool used in conjunction with the YHII electric hoist designed according to the JB/T1306-2008 standard and meeting the quality inspection office special [375] document. Intermittent and cyclical working methods, through the lifting hook or other device for the timely and rapid completion of the metallurgical production process required lifting of the transport heavy objects, is an important tool for modern industrial enterprises in metallurgy and casting sites to improve labor productivity.

Safe operation of metallurgy overhead crane

Safe operation is very important for lifting cranes with high working class, especially for metallurgy bridge crane. It is related to crane’s service life and operator’s security. Pay attention to safety and operate the crane according to standards and requirement, which can cut down failure rates and avoid accidents.

First, the crane should be installed with mechanical performance indicator, traveling limiter, overload controller, inter-lock switch, rail crane should be equipped with travelling limiter, rail-clip clamp. Before using the crane, check and test it for good condition.

Second, wire rope should be arranged in order on the drum, the end is fixed firmly. The rope must be remained at least three circle during work.

Third, never operating the crane without guider’s signal. If the signal is not clear, just stop operating. When lifting the material, person is not permitted to stand or walk under the crane.

Fourth, never letting the material drop freely, just make it drop slowly. Never sliding the material.

Fifth, after work, unload the material, put the brakes on brake, put the joystick on the neutral position, cut off the power and close the door.

Features of Metallurgical Single-girder Overhead Crane

1. Durable material, reliable quality
2. Complete safety device, low failure rate
3. Strict producing standards, good performance
4. Easy maintenance, long service term
5. Professional crane supplier, advanced technology
6. The bottom of main girder adopts special heat-insulation treatment with working environment temperature ﹣10℃~﹢60℃
7.  The bottom of the crane girder adopts special insulation treatment.
8. Applicable to work under such conditions as working level is A6, relative humidity ≤ 85%, altitude less than 2000m, non-corrosive medium.